The Board of Zoning Appeals hears requests for variances as relief from statutes of the zoning ordinance. Learn More.
November 3, 2022 - Board of Zoning Appeals (BZA)
New Business
Agenda Item #1
CASE NO. BZA : 2022-10-006
PROPERTY ADDRESS: 1125 New London Road
PARCEL ID # P6412217000008
APPLICANT: Nora Hyde
PROPOSED REQUEST:
The applicant is requesting to build a 30'x50' metal pole barn on the northwest portion of
the property. The pole barn would meet all set back requirements of the Hamilton Zoning
Ordinance (HZO).
Variance 1. 1401 Accessory Buildings (allowed when an accessory to a principally permitted,
conditional, or specifically permitted use):
C. Accessory buildings shall have a maximum first floor area of one thousand (1,000)
square feet. A variance request of 50% as presented.
Variance 2. 1401 Accessory Buildings (allowed when an accessory to a principally permitted,
conditional, or specifically permitted use):
H. Height: maximum of fifteen (15) feet. Lots containing an area larger than two (2)
acres are permitted to have accessory structures that have a height of twenty-five (25)
feet. A variance request of 13.3% as presented.
Variance 3. 1816 Accessory Buildings: Accessory buildings over 200-sq. ft. in area must
have the same exterior finish material on all sides as the primary material and approximate
color as the front of the existing primary building. Alternatively, if the primary finish of the
primary building façade is brick or stone, 100% of the front façade of the accessory building
and 25% of facades visible from the street (not alley) may match the primary building
material. All materials of the accessory building must follow the regulations found in Section
1904. A variance request of 100% as presented.
Variance 4. 1904 C: Prohibited Materials:
Such materials may not be utilized at all. These prohibited materials include; plexi-glass, flimsy
or synthetic appearing exterior wall materials which include, but are not limited to, materials
such as ribbed, industrial style metal siding, metal siding and roofing materials, exposed fastener
metal wall panels, vinyl siding, T1-11 or other hard board type materials that are manufactured
in sheets. Plain/smooth faced CMU is also a prohibited material. A variance request of 100% as
presented.